MMA Welding
FORCE 195 230V ACX PLASTIC CARRY CASE
code 815859
MMA inverter, electrode welding machine in direct current (DC).
Usable electrodes: rutile, basic, stainless steel, cast iron, etc.
Characteristics:
– Reduced weight and dimensions
– High welding current stability in spite of mains voltage fluctuations
– Arc force, hot start and anti-stick devices
– Thermostatic, overvoltage, undervoltage, overcurrent, motorgenerator (± 15%) protections.
Complete with MMA welding accessories and plastic carry case.
Tig-Welding
FORCE 170 TIG DC LIFT 230V KIT PL.C.CASE
code 816214
TIG (LIFT striking) and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Characteristics: compact and light * display to check welding current * MMA regulations: arc force and hot start * MMA electrodes: rutile, basic, stainless steel and cast iron * thermostatic, overcurrent, overvoltage, undervoltage, motorgenerator (+/-15%) protections. Complete with TIG welding accessories and plastic carry case.
ADVANCE 227MV/PFC TIG DC-LIFT100-240V AC
code 852052
TIG (LIFT striking) and MMA inverter welding machine in direct current (DC).
Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys.
The MV/PFC device guarantees the use of a large range of variable power supply (100-240V), operations even when power supplies are fluctuating and unstable, use of long extensions and a 30% drop in absorptions compared to other welding machines of equal power.
The Voltage Reduction Device (VRD) is used to decrease the output voltage to a safe level when the welding machine is on but not in welding conditions. This grants the operator’s safety: he can come into contact with the electrode without risks, until welding operations are resumed. (for use in damp environment such as mines or shipyards, etc.).
Features:
– compact and light
– display to check welding current
– MMA regulations: arc force and hot start
– MMA electrodes: rutile, basic, stainless steel and cast iron
– thermostatic, overcurrent, overvoltage, undervoltage, motorgenerator (+/-15%) protections.
Complete with TIG welding accessories.
TECNICA TIG 160 DC 230V KIT ALU C. CASE
code 815957
TIG (high frequency HF or LIFT striking) and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. Characteristics: compact and light * TIG regulations: current down slope * MMA regulations: arc force according to the type of electrode in use * 2/4 strokes operation * hot startand anti-stick devices * remote control connector * MMA electrodes: rutile, basic, stainless steel and cast iron * thermostatic, overcurrent, overvoltage, undervoltage protections. Complete with TIG welding accessories and aluminium carry case.
Engine Driven Welding machine
MOTOINVERTER 204 CE HONDA
code 815793
Inverter technology, petrol engine-driven (HONDA motor) welding machine with high frequency permanent magnets alternator for MMA and TIG-DC electrode welding with scratch striking. Use with a wide range of electrodes: rutile, basic, cellulosic, stainless steel, cast iron, etc. It can also beused as direct current (DC) generator for powering electrical tools such as drills, sanders, etc. Characteristics: 4-stroke, air cooled petrol engine with recoil starter * shutdown for lack of oil *over-fast engine safeguard * continuous welding current adjustment * high current stability by variations in engine revs * hot start, anti-stick devices * arc force regulation * welding machine-generator selector switch * thermostatic protection.
MOTOINVERTER 254 CE HONDA
code 815975
Inverter technology, petrol engine-driven (HONDA motor) welding machine with high frequency permanent magnets alternator for MMA and TIG-DC electrode welding with scratch striking. Use with a wide range of electrodes: rutile, basic, cellulosic, stainless steel, cast iron, etc. It can also be used as direct current (DC) generator for powering electrical tools such as drills, sanders, etc. Characteristics: 4-stroke, air cooled petrol engine with recoil starter * shutdown for lack of oil *over-fast engine safeguard * continuous welding current adjustment * high current stability by variations in engine revs * hot start, anti-stick devices * arc force regulation * welding machine-generator selector switch * thermostatic protection.
MOTOINVERTER 264D CE LOMBARDINI
code 815980
Inverter technology, diesel engine-driven (LOMBARDINI motor) welding machine with high frequency permanent magnets alternator for MMA and TIG-DC electrode welding with scratch striking. Use with a wide range of electrodes: rutile, basic, cellulosic, stainless steel, cast iron, etc. It can also beused as direct current (DC) generator for powering electrical tools such as drills, sanders, etc. Characteristics: air cooled, diesel engine with direct injection and electric starting by key * shutdown for lack of oil * over-fast engine safeguard * continuous welding current adjustment * highcurrent stability by variations in engine revs * hot start, anti-stick devices * arc force regulation * welding machine-generator selector switch * thermostatic protection.
MOTOINVERTER 264D CE LOMBARDINI
code 815980
Inverter technology, diesel engine-driven (LOMBARDINI motor) welding machine with high frequency permanent magnets alternator for MMA and TIG-DC electrode welding with scratch striking. Use with a wide range of electrodes: rutile, basic, cellulosic, stainless steel, cast iron, etc. It can also beused as direct current (DC) generator for powering electrical tools such as drills, sanders, etc. Characteristics: air cooled, diesel engine with direct injection and electric starting by key * shutdown for lack of oil * over-fast engine safeguard * continuous welding current adjustment * highcurrent stability by variations in engine revs * hot start, anti-stick devices * arc force regulation * welding machine-generator selector switch * thermostatic protection.
Plasma cutting system
TECNICA PLASMA 31 230V
code 815014
Inverter, compressed air plasma cutting system, with contact striking of pilot arc.
Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc.
Features:
– reduced weight and dimensions
– warning led for torch under voltage, protections
– torch automatic cooling
– visualization of air pressure
– thermostatic, overvoltage, undervoltage, overcurrent protections.
Complete with torch.
SUPERIOR PLASMA 160 230-400V + ACC.
code 816174
Inverter, compressed air plasma cutting system, with contact striking of pilot arc.
Allows a rapid, distortion-proof cutting, grid cutting and gauging of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc.
It allows interfacing with automated cutting systems.
Features:
– easy to carry
– high cutting current stability
– user-friendly easy to read and adjust digital panel
– remote control
– thermostatic, overvoltage, undervoltage, overcurrent, torch short circuit, phase failure protections.
Complete with torch.
ENTERPRISE PLASMA 160HF 230-400V
code 815870
Chopper, compressed air plasma cutting system, with high frequency HF striking of pilot arc.
Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, aluminium, copper, brass.
Possibility to use long nozzles.
Features:
– high stability of cutting current
– warning led for torch under voltage, air fault, protections
– control of torch cooling
– visualization of air pressure
– possibility to cut on grids with automatic restart of pilot arc
– storage of the last 10 alarms
– thermostatic, overvoltage, undervoltage, overcurrent, torch shortcircuit, phase failure protections.
Complete with torch.
SUPERPLASMA 130 HF 230-400V
code 830512
Compressed air plasma cutting system with high frequency HF striking of pilot arc.
Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc.
Possibility to use long nozzles.
Features:
– 2 positions for regulation of cutting current
– control devices for torch under voltage, air pressure, torch short circuit, phase failure, thermostatic protection
– possibility to cut on grids with automatic restart of pilot arc (self restart)
– visualization of air pressure.
Complete with torch.