NIHGC LTD
NIHGC LTD

Benders

RIDGID 310/316M LEVER BENDER 36962

RD36962


  • Offset cushion grip handles and a 90° start angle, together with a specially engineered plastic shoe, combine to ease bending effort.
  • Tube Size Capacity (Actual OD): 5/8 in
  • Bend Radius: 2-1/4 in
  • Weight (lbs): 7
  • Inch and Metric

RIDGID 358 GEARED RATCHET TUBE BENDER 35170

RD35170


  • 358 Geared Ratchet Tube Bender 35170
  • High geared mechanical ratios, bend heavy-wall steel tube (up to 1/8″ wall thickness), stainless steel tube (up to 3/32″ wall thickness) and hard copper water tube (types K and L).
  • Benders produce uniform bends up to 180°, with no need to anneal tubing or use special temper grade tubing.
  • Reduce bending effort to a minimum.
  • Radius Bend at Center of Tube (in): 3
  • Tube O.D. (in): 5/8

RIDGID 403 LEVER BENDER 36117

RD36117


  • Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06″ (1.5 mm) to a maximum of 180°.
  • Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends.
  • Tube Size Capacity (Actual OD) (in.): 3/16
  • Bend Radius (in.): 5/8
  • Weight (lbs): 1.5

RIDGID LEVER BENDER NO.405 5/16″ 36092

RD36092


  • This product is dual-purpose, being both inch and metric
  • The 90 degree set up generates the leverage required to produce smooth, distortion-free bends to 180 degree in soft copper, steel and stainless steel tubing.
  • The open-side design slides over tubing at any point.
  • Clearly marked in 15 degree increments
  • 5/16″ Tube Size, 15/16″ Bend Radius

RIDGID THIN-WALL CONDUIT BENDERS 1/2″ 35215

RD35215


  • Made of cast iron, these tools have exceptionally smooth side walls which grip conduit snugly to minimize distortion.
  • Bending grooves conform to Standard Code Radii. Marks indicate 30°,45°, 60° and 90° bends.

RIDGID 345 45° SAE FLARES 23332

RD23332


  • 345 45° SAE Flares 23332
  • Model 345 is a precision designed tool for producing 45° flares in soft copper, brass, aluminum and mild steel tubing.
  • A hardened, smooth cone provides fast, 45° flares either single or double lap.
  • A single clamp screw provides for easy clamping and removal of tubing.
  • Sizes: 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8

RIDGID 345/150 45° SAE FLARES W/NO. 150 TUBING CUTTER AND CASE KIT 24797

RD24797


  • 345/150 45° SAE Flares w/No. 150 Tubing Cutter and Case Kit 24797
  • Model 345 is a precision designed tool for producing 45° flares in soft copper, brass, aluminum and mild steel tubing.
  • A hardened, smooth cone provides fast, 45° flares either single or double lap.
  • A single clamp screw provides for easy clamping and removal of tubing.
  • Flare Sizes: 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8
  • Includes No. 150 Cutter and Tubing Case Kit

RIDGID 45 DEGREE SAE FLARES 83037

RD83037


  • 45 Degree SAE Flares 83037
  • Flares steel, stainless steel, hard copper and brass tubing – through a wall thickness of 0.035″ (0.9 mm).
  • Easy to use – Racheting handle reduces effort required especially in confined areas
  • Quick set-up – Improves productivity
  • Durable – Eccentrically mounting, hardened steel flaring cone
  • Smooth Flares – Handle clutch releases when flare is complete to iron and smooth flare
  • Versatile – Produces 45 degree flare in sizes from 1/8″- 3/4″
  • Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4

RIDGID MODEL 258 POWER PIPE CUTTER 50767

RD50767


  • Cutting Capacity: Model 258 21/2″ to 8″ schedule.
  • 10*/40 steel pipe.
  • Model 700 Power Drive. (Not Included)
  • Power Drive RPM: 26-30 (no load).
  • Weight: 105 lbs. (excludes No. 700 Power Drive)
  • One (1) RIDGID 774 Square Drive Adapter.
  • One (1) 8 1/2″ HD Cutter Wheel Assembly.
  • One (1) Hydraulic Ram and Foot Pump.
  • Two (2) 2 1/2″ to 12″ Ball Transfer Pipe Supports
  • Square cut 21′ or nipple lengths of pipe without effort.
  • Easily cuts by displacing instead of removing pipe material.
  • No abrasive dust, dangerous sparks, or open flame.
  • Quickly cuts steel pipe with minimal burr.
  • Great for cutting pipe for groove joining.
  • Heavy-duty design is perfect for field or shop use.
  • Adaptable for beveling.

Translate »