NIHGC LTD
NIHGC LTD

Nailers, Staplers & Compressors


AF353

23 Gauge, 1‑3/8″ Pin Nailer

The Makita 23 Gauge Pin Nailer (model AF353) offers an array of features and powerful performance in a compact size. The AF353 has a side, drop-in loading magazine that accepts standard 23 ga. headless pins sized 5/8″, 11/16″, 3/4″, 1″, 1-3/16″, and 1-3/8″. The nail lock-out and red window alerts the user when to reload pins as the 2-finger trigger is used for controlled firing. With a compact size and weighing in at only 2 lbs., the AF353 was engineered for all-day professional use ideal for installing moulding, chair rail, tacking trim, glass retainers to doors, cross pinning dowels & joints, cabinets, paneling, glazed bead, craft work, picture frame assembly, window beading, rattan furniture, and a whole host of other woodworking applications. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a rear exhaust port that directs exhaust air away from the user and work surface, a built-in air duster that provides convenient air flow to clear your workspace, and 2 removable no-mar tips with sightlines for increased pinning accuracy.
Applicable bar length (cm/inch)  30, 35 / 12, 14

Powerful motor drives standard headless pins sized 5/8″, 11/16″, 3/4″, 1″, 1-3/16″ and 1-3/8″

Aluminum body, magazine and cylinder for strength and durability; weighs only 2 lbs.

Nail lock-out mechanism protects tool and work surface from pin-less blank fires (dry-fires)

Side, drop-in loading magazine holds up to 130 nails for maximum efficiency

Built-in air duster provides convenient air flow to clear work surface

Double, 2-finger trigger for user convenience

Rear exhaust port directs exhaust air away from operator and work surface

Includes two removable no-mar tips with sightlines for increased pinning accuracy; convenient on tool storage

Easy to clear nose for fast and easy nail extraction should a jam occur

Narrow nose design allows easy nailing access to tight areas and angles

Magazine self adjusts to the proper 5/8″, 3/4″, 1″, 1-3/16″ or 1-3/8″ fastener length when loaded

Reversible belt hook allows the tool to remain close

Housing bumpers protect tool and work surface

Integrated rubber soft grip for operator comfort

Ideal for installing moulding, chair rail, tacking trim, glass retainers to doors, cross pinning dowels & joints, cabinets, paneling, glazed bead, craft work, picture frame assembly, window beading, rattan furniture, and a wide variety of other woodworking applications

Minimum recommended air delivery of .9 SCFM @ 90PSI

3-year limited warranty

(1) Pneumatic Nailer Oil (181434-7)

(1) Safety Glasses

(2) No-Mar Tip

(1) Air Fitting

(1) Hex Wrench

(1) Tool Case

Operating Air Pressure :65 – 100 PSI

Nail Size (in., ga.) :5/8″ to 1-3/8″ (23 ga.)

Maximum Magazine Capacity :130

Minimum Recommended Air Delivery :.9 SCFM @ 90 PSI

Certifications and listings :ANSI Certified

Dimensions (LxWxH) :8-3/16″ x 2-5/8″ x 7-1/2″

Net Weight :2 lbs.

Color Family :Teal

Fastening category :Pin

Manufacturer Warranty :3-year limited warranty

Max. nail/fastener length :1-3/8″

Power Type :Pneumatic

Case Included :Yes

Shipping Weight :6.38 lbs.

UPC Code :088381-822428

AF601

16 Gauge, 2‑1/2″ Straight Finish Nailer

The Makita 16 Gauge Straight Finish Nailer (model AF601) combines a myriad of features and powerful performance in a compact size. The AF601 has a rear-loading magazine that accepts standard 16 ga. straight finish nails sized 1″ to 2-1/2″. The nail lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 3.8 lbs., the AF601 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

Efficient motor design offers leading power performance

Nail lock-out mechanism protects tool and work surface from dry-fires

“Tool-less” depth adjustment for more precise flush and countersink nailing

Built-in air duster provides convenient air flow to clear work surface

2-mode selector switch for control over nailing operation

Multi-directional exhaust port directs exhaust air away from operator

“Tool-less” easy to clear nose for fast and easy nail extraction

Housing bumpers protect tool and work surface

Magnesium body offers durability and less weight

Includes two removable no-mar tips; convenient on tool storage

Powerful motor design drives standard 16 gauge, straight finish nails from 1″ to 2-1/2″ in length

Reversible belt hook allows the tool to remain close

Integrated rubber soft grip for operator comfort

Rear lock-and-load magazine holds up to 100 nails for maximum efficiency

Narrow nose design allows easy nailing access in confined areas

Ideal for trim work, baseboard and crown molding installation, flooring and other woodworking applications

Minimum recommended air delivery of 2.7 SCFM @ 90PSI

3-year limited warranty

(1) Pneumatic Nailer Oil (181434-7)

(1) Safety Glasses

(2) No-Mar Tip

(1) Air Fitting

(1) Tool Case

Operating Air Pressure :70 – 120 PSI

Nail Size (in., ga.) :1″ to 2-1/2″ (16 ga.)

Maximum Magazine Capacity :100

Minimum Recommended Air Delivery :2.7 SCFM @ 90 PSI

Certifications and listings :ANSI Certified

Dimensions (LxWxH) :12″ x 3-3/4″ x 11-3/4″

Net Weight :3.8 lbs.

Color Family :Teal

Fastening category :Finish

Manufacturer Warranty :3-year limited warranty

Max. nail/fastener length :2-1/2″

Power Type :Pneumatic

Case Included :Yes

Shipping Weight :9 lbs.

UPC Code :088381-822404

AF635

15 Gauge, 2‑1/2″ Angled Finish Nailer, 34⁰

The Makita 15 Gauge Angled Finish Nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. angled finish nails sized 1-1/4″ to 2-1/2″. The nail lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

Powerful motor drives 15 gauge “DA” style angled finish nails from 1-1/4″ to 2-1/2″

Magnesium body, aluminum magazine and cylinder deliver strength and durability

“Tool-less” depth adjustment for more precise flush and countersink nailing

Nail lock-out mechanism protects tool and work surface from dry-fires

Built-in air duster provides convenient air flow to clear work surface

Efficient motor design offers leading power performance

“Tool-less” easy to clear nose for fast and easy nail extraction

2-mode selector switch for control over nailing operation

Multi-directional exhaust port directs exhaust air away from operator

Includes two removable no-mar tips; convenient on tool storage

Reversible belt hook allows the tool to remain close

Housing bumpers protect tool and work surface

Integrated rubber soft grip for operator comfort

Rear lock-and-load magazine holds up to 100 nails for maximum efficiency

Narrow nose design allows easy nailing access in confined areas

Ideal for trim work, baseboard and crown molding installation, hanging doors, exterior fascia and soffits, and other woodworking applications

Minimum recommended air delivery of 3.4 SCFM @ 90PSI

3-year limited warranty

(1) Pneumatic Nailer Oil (181434-7)

(1) Safety Glasses

(2) No-Mar Tip

(1) Air Fitting

(1) Tool Case

Operating Air Pressure :70 – 120 PSI

Nail Size :1-1/4″ to 2-1/2″ (15 ga. DA style)

Maximum Magazine Capacity :100

Minimum Recommended Air Delivery :3.4 SCFM @ 90 PSI

Certifications and listings :ANSI Certified

Dimensions (LxWxH) :13-3/8″ x 3-15/16″ x 12-1/8″

Net Weight :4 lbs.

Color Family :Teal

Fastening category :Finish

Manufacturer Warranty :3-year limited warranty

Max. nail/fastener length :2-1/2″ (15 ga. DA style)

Power Type :Pneumatic

Case Included :Yes

Shipping Weight :9.7 lbs.

UPC Code :088381-822398

AT638A

1/4″ Narrow Crown Stapler, 18 Ga.

The Makita 1/4″ Narrow Crown Stapler (model AT638A) combines ease-of-use and powerful performance in a compact size. The AT638A has a bottom-loading magazine that accepts 18 ga. staples sized 1/2″ to 1-1/2″. The staple reload indicator window alerts the user when to reload nails, and the contact arm and trigger are used together for controlled firing. The AT638A has a compact size and weighs only 2.7 lbs. for all-day use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation.

Efficient motor design offers leading power performance

“Tool-less” depth adjustment for more precise flush and countersink stapling

Built-in air duster provides convenient air flow to clear work surface

2-mode selector switch allows operator to select sequential or contact stapling operation

Multi-directional exhaust port directs exhaust air away from operator

Staple reload indicator window alerts the operator when to reload staples

Housing bumpers protect tool and work surface

Aluminum body for durability with less weight

Includes two removable no-mar tips; convenient on tool storage

Powerful motor drives standard 18 gauge, 1/4″ narrow crown staples from 1/2″ to 1-1/2″ in length

Reversible belt hook allows the tool to remain close

Integrated rubber soft grip for operator comfort

Narrow nose design allows easy stapling access in confined areas

Bottom-loading magazine holds up to 100 staples for maximum efficiency

Ideal for cabinets, shelving, insulation, lattice work, fencing and other woodworking applications

Minimum recommended air delivery of 1.6 SCFM @ 90PSI

3-year limited warranty

AT638A Instruction Manual

AT638A Parts Breakdown

Makita AT638A New Tool Flyers (English)

Makita AT638A New Tool Flyers (Spanish)

Operating Air Pressure :70 – 120 PSI

Nail Size (in., ga.) :1/2″ to 1-1/2″ (18 ga.)

Maximum Magazine Capacity :100

Minimum Recommended Air Delivery :1.6 SCFM @ 90 PSI

Certifications and listings :ANSI Certified

Dimensions (LxWxH) :9″ x 2-15/16″ x 9-7/8″

Net Weight :2.7 lbs.

Color Family :Teal

Fastening category :Stapler

Manufacturer Warranty :3-year limited warranty

Max. nail/fastener length :1-1/2″ (18 ga.)

Power Type :Pneumatic

Case Included :Yes

Shipping Weight :6.7 lbs.

UPC Code :088381-822411

AT2550A

1″ Wide Crown Stapler, 16 Ga.

The Makita 1″ Wide Crown Stapler (model AT2550A) combines ease-of-use and performance in a compact size. The AT2550A has a top-loading magazine that accepts 16 ga. 1″ staples (accepts 1″ to 2” staple length). Jammed nails are easily cleared by opening the quick-release cam-lock on the nose assembly. The AT2550A has a compact size and weighs only 5.1 lbs. for all-day use. Additional convenience features include a hook that allows the tool to remain close-by but never in the way, and a multi-directional exhaust port that directs exhaust air away from the user.

Depth adjustment engineered for more precise flush and countersink finish

Quick release cam-lock opens nose assembly to clear jammed staples, minimizing downtime

Built-in air filter minimizes dust and debris from entering tool

Ideal for lathing, roofing and sheathing

Top-loading magazine allows operator to quickly load 16 gauge, 1″ wide crown staples from 1″ to 2″ in length

Rugged aluminum magazine has large holding capacity (up to 140 staples)

Rubber bumpers protect the tool and surface from damage

Compact with less weight for all day use

Multi-directional exhaust port directs exhaust air away from operator

Rubberized handle for better fit and added comfort

Hook allows tool to remain close by but never in the way

Minimum recommended air delivery of 2.3 SCFM @ 90PSI

3-year limited warranty

(1) Hex Wrench (A0913-0011)

(1) Hook (A0316-0311)

(1) Oil Supply (A09070001)

(1) Safety Goggles (A09080-171)

(1) Air Fitting (311006-A)

Operating Air Pressure :65 – 120 PSI

Gauge :16

Leg Length :1″ to 2″

Crown :1″

Maximum Magazine Capacity :140

Dimensions (LxWxH) :14-1/2″ x 3″ x 10-1/4″

Net Weight :5.1 lbs.

Fastening category :Stapler

Power Type :Pneumatic

Max. nail/fastener length :2″

Shipping Weight :7.1 lbs.

UPC Code :088381-077507

AF505N

2″ Brad Nailer, 18 Ga.

Makita’s 2-inch Brad Nailer (model AF505N), features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.

The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jammed nails. The cast-and-machined nose piece is engineered for precise contact with the workpiece, with a non-marring rubber nose engineered to protect the work surface.

Additional features include an ultra-narrow nose design that is ideal for fastening in confined areas, and a convenient “tool-less” depth adjustment dial that can be set for a wide variety of finish applications. For added convenience, the multi-directional exhaust port rotates 360 degrees to direct exhaust air away from the user.

“Tool-less” quick-release cam-lock opens nail guide assembly to easily clear jammed nails; efficient design minimizes downtime

Easy to use “tool-less” depth adjustment dial for a wide variety of finish applications

Narrow nose design allows easy nailing access in confined areas

Non-marring rubber nose and bumpers protect the wood’s surface from being scratched or damaged

Tool hook can be rotated 180° so tool can remain close by, but never in the way

Cast and machined nose piece for precise contact

Dual nail reload indicator window alerts the user when to reload nails to avoid blank drives

Multi-directional exhaust port rotates 360° to direct exhaust air away from user

Rubberized soft grip provides more comfort

Drives a range of 18 gauge brad nails, from 5/8″ to 2″, into hard or soft wood applications; magazine capacity is up to 100 nails

Ideal for trim work, baseboard and crown molding installation, flooring and other woodworking applications

Minimum recommended air delivery of 1.5 SCFM @ 90PSI

3-year limited warranty

(1) Pneumatic Nailer Oil (181434-7)

(2) No-mar tip (HY00000378)

(1) Air Fitting (311006-A)

(1) Tool Case

(1) Safety goggle

Operating Air Pressure :60 – 115 PSI

Nail Size :5/8″ to 2″ (18 ga.)

Maximum Magazine Capacity :100

Dimensions (LxWxH) :10-1/4″ x 2-1/2″ x 9-3/8″

Net Weight :3 lbs.

Fastening category :Brad

Max. nail/fastener length :2″ (18 ga.)

Power Type :Pneumatic

Shipping Weight :7.7 lbs.

UPC Code :088381-680806

AN923

3‑1/2″ Framing Nailer, 21° Full Round Head

The Makita 3-1/2” Framing Nailer (model AN923) combines rugged construction and robust performance with ease-of-use features for commercial framing applications. The AN923 is engineered for a range of applications including framing walls, floors, and roofs, construction of sub-flooring, roof and floor decking, floor and wall sheathing/siding. It is ideal for framers, roofers and carpenters.

The AN923 accepts full round-head nails, 2” – 3-1/2”, with .113 – .162 shank diameter (plastic or wire collated). The 3-mode selector switch (bump, sequential, lock) provides increased convenience, while the “tool-less” depth adjustment offers nine settings to drive nails to a precise level on the wood’s surface. The AN923 is engineered for longer tool life and ease-of-use, with a built-in air filter to minimize dust and debris from entering, as well as a back-pressure function which clears debris out of the tool when the pressurized hose is released. Additional features include the convenient two-step loading procedure to ensure a fast re-load with minimal downtime, sharp spurs on the nose engineered to grip wood, and rubber hand-grips to provide more comfortable handling.

3-Mode selector switch (contact, sequential, lock) allows user control over nailing options

Large capacity air chamber for increased power to drive nails varying in length from 2″ to 3-1/2″

Built-in air filter minimizes dust and debris from entering tool

Anti-dry mechanism stops tool when three nails remain in the magazine

Solid rear-loading aluminum magazine for longer life

Drives up to 3-1/2″ x .162″ (16d) nails

“Tool-less” depth adjustment engineered for more precise flush and countersink nailing

Retractable hook allows tool to remain close by but never in the way

Sharp, pronounced spurs grip wood for controlled nailing at an angle

Rubber bumpers protect the tool and surface from damage

Multi-directional exhaust port directs exhaust air away from operator

Rubber grips for better control and comfortable handling

Minimum recommended air delivery of 5.1 SCFM @ 90PSI

3-year limited warranty

(1) Pneumatic Nailer Oil (181434-7)

(1) Tool Hook (122742-7)

(1) Safety Goggles (191687-A)

(1) Air Fitting (311006-A)

Operating Air Pressure :65 – 120 PSI

Nail Size :2″ – 3-1/2″ .113″ – .162″ shank diameter plastic or wire collated

Magazine Capacity (range) :64 – 74

Dimensions (LxWxH) :22″ x 4-1/4″ x 13-11/16″

Net Weight :8.7 lbs.

Maximum Magazine Capacity :74

Fastening category :Framing

Max. nail/fastener length :3-1/2″

Power Type :Pneumatic

Shipping Weight :12.3 lbs.

UPC Code :088381-070126

AN611

2‑1/2″ Siding Coil Nailer

The Makita 2-1/2″ Siding Coil Nailer (model AN611) combines rugged construction with ease-of-use features for improved performance. The AN611 accepts 1-1/4” to 2-1/2” nails (.080 – .099 shank diameter) with a 300-400 magazine capacity and an easy-loading canister with nail size adjustment. The AN611 has a 3-mode selector switch (contact, sequential, lock) that is engineered for increased user control and convenience. Additional features include a “tool-less” depth adjustment with 9 depth settings, and sharp spurs that grip the wood for increased control at an angle.user.

“Tool-less” depth adjustment with 9 detents settings engineered for more precise flush and countersink nailing

3-mode selector switch (contact, sequential, lock) allows user control over nailing options

Drives 15º wire and plastic collated nails for added convenience

Built-in air filter minimizes dust and debris from entering tool

Multi-directional exhaust port directs exhaust air away from operator

Clear loading canister with nail size adjustment allows user to quickly view when it is time to reload nails

Rubber bumpers protect work surface and tool

Smooth nose tip prevents scratching

Rubber grip for comfortable handling

Silent sheet reduces noise when disconnecting coupler

Ideal for installing fiber cement and wood shingle siding

Minimum recommended air delivery of 3.6 SCFM @ 90PSI

Includes tool case

3-year limited warranty

(1) Pneumatic Nailer Oil (181434-7)

(1) Hex Wrench (783202-0)

(1) Tool Case (824490-1)

(1) Safety Goggles (191687-A)

(1) Air Fitting (311006-A)

Operating Air Pressure :65 – 120 PSI

Nail Size :1-1/4″ – 2-1/2″ .080″ – .099″ shank diameter

Magazine Capacity (range) :200 – 400

Dimensions (LxWxH) :13-1/16″ x 5″ x 12-1/2″

Net Weight :5.1 lbs.

Maximum Magazine Capacity :400

Fastening category :Siding

Max. nail/fastener length :2-1/2″

Power Type :Pneumatic

Shipping Weight :10.15 lbs.

UPC Code :088381-022972

MAC5501G

5.5 HP* Big Bore™ Gas Air Compressor

Compressors are workhorse tools on the job site, and Makita compressors are contractor favorites for their faster recovery time, lower noise, longer tool life, and consistent job site performance. The 5.5 HP Big Bore™ Gas Air Compressor (MAC5501G) has a powerful Honda GX160 4-stroke engine for increased performance and superior reliability, with a “V” Twin style pump that runs cooler and provides up to 12.5 CFM at 100 PSI for faster recovery. Cast iron pump with Big Bore™ cylinder and piston is engineered to provide durability and faster recovery time for improved performance. And Unlike other Gas Compressors, the gauges and couplers on the MAC5501G are built into the base of the motor and pump for additional protection and added durability.

Powerful Honda GX160 4-stroke engine for increased performance and superior reliability

10-gallon twin tanks provide air supply to multiple nailers

Cast iron pump with Big Bore™ cylinder and piston is engineered to provide durability and faster recovery time for improved performance

Industrial-grade recoil starter with ergonomic grip and recoil rope design for faster, easier starts

Automatic idle control engineered to reduce gas consumption and service life

10” non-flat tire for easier job site portability

Pump is oil-lubricated for cooler running temperatures and reduced wear

Large automotive style industrial air filters for increased air intake and greater efficiency

Convenient oil drain valve at the front of the pump for easier access

Integrated control panel with oversized pressure gauges for easier visibility of tank and hose pressure

Lever-handle ball valve tank drain improves upon standard petcock design for easier maintenance and air tank release

Anti-vibration rubberized feet for less vibration and reduced “crawling” during use

Fully enclosed belt drive with large fly-wheel for more efficient cooling of the pump

Stainless steel braided discharge hose for increased corrosion resistance and durability

Low profile design for easier transport and storage

Oil sight glass for fast, easy and efficient maintenance

Two universal brass couplers for increased durability and reduced corrosion

Ideal for framers, roofers, siding installation, decking, fencing, farming, general contractors, rental industry and more

*Maximum horsepower

(2) 1/4″ Universal Quick Coupler, Male (447013-E)

Maximum Horsepower :5-1/2 HP

Running Horsepower :5.5 HP

Tank :10 gal.

Performance (40 PSI) :14 CFM

Performance (90 PSI) :12.5 CFM

Maximum Pressure :135 PSI

Overall Length :46″

Net Weight :190 lbs.

Pump :Oil lubricated

Gas or electric :Gas

Shipping Weight :233 lbs.

UPC Code :088381-685634

AC001

Compact Air Compressor

Compressors are workhorse tools on the job site and in the work shop. Makita compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance. The new ACC001 Compact Air Compressor combines a compact size with a powerful induction motor for powerful, portable performance.

The AC001 is powered by a 1/6 maximum horsepower induction motor that provides up to 125 PSI, with a lightweight design (only 23.1 lbs.). It also has lower noise (72dBA) so it’s ideal for indoor use.

The roll cage construction provides added protection for the pump and motor assembly. Additional features include a low AMP draw that reduces the incidents of tripped breakers at start-up, as well as an oil-less pump designed for maintenance-free operation.

The AC001 is the latest addition to Makita’s expanding line-up of industrial air compressors. The powerful and reliable induction motor, combined with the lower noise and compact size, make the AC001 ideal for case and base installation, trim and finish carpentry, cabinet and furniture construction, and more.

Powerful 1/6 maximum horsepower induction motor provides up to 125 PSI

Lightweight design (23.1 lbs.) for increased job site portability

Low noise for operator comfort; ideal for indoor use

Low AMP draw reduces incidents of tripped breakers at start-up

Roll cage construction for extra protection of pump and motor assembly

Oil-less pump designed for maintenance-free operation

Copper discharge tubing for increased heat dissipation

Lever-handle ball valve tank drain improves upon standard petcock design for easier maintenance and air tank release

Universal brass coupler for increased durability and reduced corrosion

Large pressure gauges for easier visibility of tank and hose pressure

Ideal for case and base installation, trim and finish carpentry, cabinet and furniture makers, and more

(1) 1/4″ Universal Quick Coupler, Male (447013-E)

Motor :1/6 HP

Running Horsepower :1/6 HP

Tank :1 gal.

Performance (40 PSI) :.58 CFM

Performance (90 PSI) :.45 CFM

Maximum Pressure :125 PSI

Net Weight :23.1 lbs.

Pump :Oil-less

Overall Length :13″

Gas or electric :Electric

Shipping Weight :26.9 lbs.

UPC Code :088381-640190

MAC2400

2.5 HP* Big Bore™ Air Compressor

Makita’s 2.5HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability for tough job site conditions.

2.5 HP with Big Bore™ Engineered Pump

The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC2400 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore™ oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise.

The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications

The MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

Cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance

Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity and lower noise

Roll-cage construction provides complete protection to withstand extreme jobsite environments

Low AMP draw reduces incidences of tripped breakers at start-up

Pump is oil-lubricated for cooler running temperatures and reduced wear

Copper finned discharge tubing for increased heat dissipation and reduced water in the tank

Pump runs at lower RPM (1,730) resulting in lower noise (79dB) and improved pump durability

Large automotive style industrial air filter for increased air intake and greater efficiency

Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance

Oil sight glass for fast, easy and efficient maintenance

Lever-handle ball valve tank drain improves upon standard petcock design for easier maintenance and air tank release

Built-in thermal overload for additional motor protection

(2) 1/4″ Universal Quick Coupler, Male (447013-E)

(1) Air Compressor Oil (181122-A)

Maximum Horsepower :2-1/2 HP

Running Horsepower :2.1 HP

Tank (twin stacked) :4.2 gal.

Performance (40 PSI) :4.8 CFM

Performance (90 PSI) :4.2 CFM

Maximum Pressure :130 PSI

Net Weight :77 lbs.

Pump :Oil lubricated

Gas or electric :Electric

Shipping Weight :86.3 lbs.

UPC Code :088381-053532

MAC5200

3.0 HP* Big Bore™ Air Compressor

Makita’s 3.0 HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport.

3.0 HP with Big Bore™ Engineered Pump

The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency.

The 5.2 gallon tank sustains an operating pressure of 140 PSI and delivers 40PSI (6.9 CFM) and 90 PSI (6.5 CFM), enough for two nailers. The oil lubricated pump runs cooler, and the finned discharge tubing dissipates heat more efficiently. The roll cage construction is built for extra protection for the pump and motor assembly, helping it withstand harsh jobsite environments.

Ease-of-use and convenience features include tool hangers, a built-in storage compartment for air fittings and accessories, and an air hose wrap to store 50’ of 3/8” air hose with handle folded or upright. Other features include a convenient oil drain and oil sight glass, and a tank drain valve that supersedes standard petcock design for easier maintenance.

Versatile Design for a Range of Applications

The MAC5200 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

Cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance

Powerful 3.0 HP motor produces 6.5 CFM at 90 PSI for increased productivity

Pump is oil-lubricated for cooler running temperatures and reduced wear

Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance

Folding handle with low profile design for easy storage with handle folded

Rugged wheels for jobsite portability

Built-in storage compartment conveniently stores air fittings and accessories

Air hose wrap stores 50 ft. of 3/8″ air hose with handle folded or upright

Copper finned discharge tubing for increased heat dissipation and reduced water in the tank

Tool hangers store tools when not in use

Large automotive style industrial air filter for increased air intake and greater efficiency

Roll cage construction for extra protection to pump and motor assembly

Oil sight glass for fast, easy and efficient maintenance

Lever-handle ball valve tank drain improves upon standard petcock design for easier maintenance and air tank release

Convenient oil drain at the front of the pump for easy access

Built-in thermal overload for additional motor protection

(2) 1/4″ Universal Quick Coupler, Male (447013-E)

(1) Air Compressor Oil (181122-A)

Maximum Horsepower :3 HP

Running Horsepower :2.1 HP

Tank :5.2 gal.

Performance (40 PSI) :6.9 CFM

Performance (90 PSI) :6.5 CFM

Maximum Pressure :140 PSI

Net Weight :88 lbs.

Pump :Oil lubricated

Gas or electric :Electric

Shipping Weight :107 lbs.

UPC Code :088381-053549

MAC700

2.0 HP* Big Bore™ Air Compressor

Makita’s 2.0 HP Air Compressor (MAC700) is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output, less noise and improved jobsite performance. The MAC700 delivers industrial power and results with improved durability for tough job site conditions.

2.0 HP with Big Bore™ Engineered Pump

The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC700 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore™ oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise.

The 2.6 gallon tank sustains an operating pressure of 130 PSI, and delivers 40 PSI (3.8 CFM) and 90 PSI (3.3 CFM). The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.

Versatile Design for a Range of Applications

The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

Cast iron pump with Big Bore™ cylinder and piston is engineered to provide faster recovery time for improved performance

Powerful 2.0 HP* 4-Pole motor produces 3.3 CFM at 90 PSI for increased productivity and lower noise

Pump runs at lower RPM (1,730) resulting in lower noise (80dB) and improved pump durability

Low AMP draw reduces incidences of tripped breakers at start-up

Pump is oil-lubricated for cooler running temperatures and reduced wear

Copper finned discharge tubing for increased heat dissipation and reduced water in the tank

Roll-bar handle for portability and additional protection

Large automotive style industrial air filter for increased air intake and greater efficiency

Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance

Oil sight glass for fast, easy and efficient maintenance

Lever-handle ball valve tank drain improves upon standard petcock design for easier maintenance and air tank release

Built-in thermal overload for additional motor protection

(1) Air Compressor Oil (181122-A)

(1) 1/4″ Universal Quick Coupler, Male (447013-E)

Maximum Horsepower :2 HP

Running Horsepower :1.7 HP

Tank :2.6 gal.

Performance (40 PSI) :3.8 CFM

Performance (90 PSI) :3.3 CFM

Maximum Pressure :130 PSI

Net Weight :52 lbs.

Pump :Oil lubricated

Gas or electric :Electric

Shipping Weight :60.5 lbs.

UPC Code :088381-053525

AC310H

2.5 HP* High Pressure Air Compressor

The heart of Makita’s high pressure pneumatics is the 2.5 HP High Pressure Air Compressor, model AC310H. With a high pressure 1.6 gallon tank, the AC310H provides the same capacity as a conventional five-gallon tank at 120 PSI, but with less noise and a more compact size for easier transport. In addition, the AC310H is engineered to run high pressure and conventional nailers.

The AC310H is engineered with High Pressure Technology that dramatically increases air pressure created in the compressor and delivered to pneumatic nailers. The result is a superior power-to-weight ratio, and a more efficient system than conventional compressors.

Dual capacity: two universal couplers for conventional nailers (3.6 CFM at 90 PSI) and two couplers for high pressure nailers (2.7 CFM at 300 PSI)

Low amp draw reduces incidences of tripped breakers and voltage drop during start-ups

Efficient dual-head (2 stage) pump provides faster recovery time and improved performance

Makita High Pressure compressor technology delivers 400 PSI capacity for the next generation of high pressure nailers

Pump runs at lower RPM (1,720) resulting in lower noise and improved pump durability

Four-pole induction motor for increased efficiency and added durability

Oil-less pump designed for maintenance-free operation

High pressure 1.6 gallon tank provides the same capacity as a conventional 5 gallon tank at 120 PSI

Large rubberized bumpers for added durability

Roll cage and kick plate construction to withstand extreme jobsite environments

Large regulator knobs for easier adjustments

(2) 1/4″ High Pressure Universal Quick Coupler, Female (HY00000337)

(2) High Pressure Quick Coupler (HY00000351)

Maximum Horsepower :2-1/2 HP

Running Horsepower :1.9 HP

Tank :1.6 gal.

Performance (40 PSI) :3.7 CFM

Performance (90 PSI) :3.6 CFM

Performance (300 PSI) :2.7 CFM

Maximum Pressure :400 PSI

Net Weight :79.4 lbs.

Pump :Oil-less

Gas or electric :Electric

Shipping Weight :88.16 lbs.

UPC Code :088381-096928

Translate »