Demolition Hammers
H41MB SDS Max Demolition Hammer
- 7.4 lbs of impact energy for powerful chipping and faster demolition
- Variable lock mechanism for quick and easy chisel adjustment
- Compact and light weight for extended use with less fatigue
- Reduced motor vibration through increased rigidity in the motor housing
- More efficient cooling of the cylinder case for longer tool life
- Download the H41MB Tool Card
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Includes”]
- Bull Point (SDS Max Bit) (313471)
- Case (326511)
- Side Handle (317103)
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Specifications”]
Shank | SDS Max |
Full-Load Impact Rate | 3,000 BPM |
Amperage | 8.2 |
Impact Energy | 7.4 ft/lbs |
Insulation | Double |
Length | 16-15/16″ |
Product Weight | 11.2 lbs |
Packaged Dimensions | 14″ x 20.7″ x 5.5″ |
Packaged Weight | 19.6 lbs |
Warranty | 1-Year |
[/cq_vc_tab_item][/cq_vc_tabs]
H45MEY SDS Max AC Brushless Demolition Hammer
- Ultra efficient AC Brushless motor that permits the use of extra-long extension cords without power loss, extends product life and eliminates maintenance of armatures or carbon brushes
- Superior performance when using a generator due to an internal inverter circuit that regulates uneven power supply
- UVP (User Vibration Protection) technology greatly reduces vibration for comfortable extended use and fewer vibration related injuries via the use of internal counterweights and springs, as well as low vibration handles
- AHB (Aluminum Housing Body) construction significantly enhances the internal and external durability of the tool. Externally the metal body construction is more resistant to jobsite impacts and harsh conditions than plastic counterparts. Internally, incorporating a plastic stator holder around the Brushless motor provides the internal double insulation construction that can protect the user from electric shock. The motor and hammer bearings are seated in the metal housing to reduce vibration and stress, and increases stability. During use, the metal keeps the internal gears secure and aligned preventing wear and power loss. Additionally- the metal body dissipates heat better, increasing overall motor life
- Push button impact rate selector easily changes the angle of the bit to perform precise work and also serves as a diagnostic tool to trouble shoot overload or overheating issues
- Built-in protection circuit prevents damage to the tool in the event of an abnormality like overload, binding, overheating etc.
- 9.9 ft-lbs of impact energy for busting through hard material
- 1,430-2,850 BPM full load max impact rate to quickly remove stubborn material
- 1,150 watts of input power for increased productivity
- Idle strike restrictor to prevent no-load activation and additional wear on the tool
- Variable lock mechanism in neutral position allows for 12-angle positions for optimal working angle options
- Quick release bit system for fast and simple bit replacements for different applications
- Large 2 finger trigger switch with lock-on for easy operation and less fatigue
- Power indicator lamp lights up when power is supplied to the tool
- Soft, non-slip elastomer grip handle for improved comfort and control
- 360 Degree adjustable side handle for optimal comfort and control
- Compatible with multiple SDS Max Shank Demolition bits
- Download the H45MEY Tool Card
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Includes “]
- Plastic case (337594)
- Side Handle (333199)
- Bull Point Bit SDS Max Shank (313471)
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Specifications”]
Shank | SDS Max |
Motor Type | AC Brushless |
Full Load Impact Rate | 1,430 – 2,850 BPM |
Impact Energy | 9.9 ft-lbs |
Power Input | 1150 Watt |
Full Load Vibration Level | 8.0 m/s2 |
Switch | Two-Finger Trigger |
Handle | Shock Absorbing “D” Shaped Side and Trigger Handles |
Amps | 11.3 |
Housing Material | Aluminum |
Warranty | 1-Year |
Weight | 16.1 lbs |
[/cq_vc_tab_item][/cq_vc_tabs]
H55SC 3/4 Inch Hex Demolition Hammer
- 11.8ft/lbs of impact energy delivers forcible chipping with low vibration and noise level
- 10.4 Amp motor increases productivity
- Exclusive “mouth-less idle” hammering mechanism requires less pressing force and reduces wear and tear on tool
- Dust resistant cover protects tool for extended maintenance free operation
- Removable side D-handle adjusts for better control and reduces vibration
- Variable lock system makes bit replacement simple and offers multiple tool angles for chiseling
- Download the H55SC Tool Card
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Includes “]
- Side Handle (986959)
- 6mm Hex Wrench (872422)
- 12″ Bull Point (985430)
- Dust Cover (985468)
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Specifications”]
Shank | 3/4″ Hex | ||||
Amps | 10.4 | ||||
Impact Rate | 1,450 bpm | ||||
Impact Energy | 11.8 ft/lbs | ||||
Power Input | 1140W | ||||
Tool Length | 22-1/4″ | ||||
Tool Weight | 24.3 lbs |
[/cq_vc_tab_item][/cq_vc_tabs]
H65SD2 1-1/8 Inch Hex 40 lbs Demolition Hammer
- 31 ft/lbs of impact energy
- Powerful 10.8 Amp (1,240 W input) motor
- Impressive impact rate of 1,400 bpm for rapid results
- Low noise level, full-load only 104 dB
- Low vibration levels (full-load vibration level of only 19.9 m/s2) for less fatigue with continuous use
- Elastomer grip reduces vibration transfer while providing a secure hold for added safety
- Cushioned auxilliary handle that rotates 360 degrees is located between the body of the tool and the bit cylinder to provide optimal control and grip on the tool
- Universal tool retainer accepts 3 types of 1-1/8″ hex shank bits; standard hex, collarless retaining groove and air tool bits
- Hitachi’s patented IDI (Internal Double Insulation) Technology significantly strengthens the body of the tool
- Metal-seated armature bearing to reduce the effects of vibration and heat on motor performance
- Auto-stop brushes prevent unnecessary maintenance issues
- Lock-on trigger for comfortable extended use
- Sealed lubrication to prevent grease from leaking out and dust from creeping in and damaging the internals
- Impressive power to weight ratio for balanced and comfortable operation
- Download the H65SD2 Tool Card
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Includes”]
- Plastic Rolling Case (333356)
- 6mm Hex Bar Wrench (872422)
- 3mm Hex Bar Wrench (943277)
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Specifications”]
Bit Type | 1-1/8″ Hex |
Amps | 10.8 |
Impact Energy | 31 ft/lbs |
BPM (full load) | 1,400 |
Lubrication | Sealed Grease |
Power Input | 1,240 W |
Bit Types | Collared or Slotted |
Auto-Stop Brushes | Yes |
Low-Vibe Main Handle | Yes |
Vibration (full-load) | 19.9 m/s2 |
Length | 32-13/32″ |
Weight | 40.8 lbs |
[/cq_vc_tab_item][/cq_vc_tabs]
H65SD3 1-1/8 Inch Hex 38 lbs Demolition Hammer with UVP and AHB
- UVP (User Vibration Protection) technology greatly reduces vibration for comfortable extended use and fewer vibration related injuries via the use of internal air cushion between the striker and pistons, as well as dampener rings placed between the nose and the body; along with low vibration handles
- AHB (Aluminum Housing Body) construction significantly enhances the internal and external durability of the tool. Externally the metal body construction is more resistant to jobsite impacts and harsh conditions than plastic counterparts. Internally, incorporating a plastic stator holder around the motor provides the internal double insulation construction that can protect the user from electric shock. The motor and hammer bearings are seated in the metal housing to reduce vibration and stress, and increases stability. During use, the metal keeps the internal gears secure and aligned preventing wear and power loss. Additionally- the metal body dissipates heat better, increasing overall motor life
- 33.2 ft/lbs of impact energy – for heavy-duty demolition
- Powerful 10.8 Amp (1,340 W input) motor
- Impressive impact rate of 1,400 BPM for rapid results
- Low vibration levels (full-load vibration level of only 13.9 m/s2) for less fatigue with continuous use
- Elastomer grip reduces vibration transfer, while providing a secure hold for added safety
- Cushioned auxilliary handle that rotates 360 degrees is located between the body of the tool and the bit cylinder to provide optimal control and grip on the tool
- Universal tool retainer accepts 3 types of 1-1/8″ hex shank bits; standard hex, collarless retaining groove and air tool bits
- Auto-stop brushes prevent unnecessary maintenance issues
- Large trigger switch with lock-on to increase productivity and reduce fatigue during continuous use
- Sealed lubrication to prevent grease from leaking out and dust from creeping in and damaging the internals
- Impressive power to weight ratio for balanced and comfortable operation
- Download the H65SD3 Tool Card
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Includes”]
- Plastic Rolling Case (339664)
- Side Handle (Installed)
[/cq_vc_tab_item][cq_vc_tab_item tabtitle=”Specifications”]
Bit Type | 1-1/8″ Hex |
Amps | 10.8 |
Impact Energy | 33.2 ft/lbs |
Full Load Impact Rate | 1,400 BPM |
Lubrication | Sealed Grease |
Power Input | 1,240 W |
Bit Types | Collared or Slotted |
Auto-Stop Brushes | Yes |
Handle Type | Shock Absorbing “D” Shaped Side and Trigger Handles |
Vibration (full-load) | 13.9 m/s2 |
Switch | Two-Finger Trigger w/ Lock-On |
Motor Type | Standard Brushed |
Housing Material | Aluminum |
Warranty | 1-Year |
Weight | 44.3 lbs |
[/cq_vc_tab_item][/cq_vc_tabs]