NIHGC LTD
NIHGC LTD

Saws


P18DSLP4 18V Lithium Ion 3-1/4″ Planer (Tool Body Only)


  • Covered by Hitachi’s Lifetime Lithium Ion tool warranty
  • Available as tool body only (batteries and chargers sold separately)
  • Tool body compatible with all 18V Lithium Ion slide-type batteries for fade free power, less weight and 3x the total battery life of traditional NiCd batteries
  • Capable of generating a no-load speed of 16,000 RPM
  • Cutting capabilities include 3-1/4″ cutting width, cutting depth of 5/64″ and max rabbeting depth of 11/32″
  • Ergonomic tool is only 7.3 lbs (with BSL1830 battery)
  • Soft grip handle for improved comfort and less fatigue
  • Remaining battery level indicator to notify user when run time is getting low
  • Stand attached on the rear side to prevent the blade from accidental contact with the user when not in use
  • Download the P18DSLP4 Tool Card

Volts  18 
Cutting Width  3-1/4″ 
Max Cutting Depth 5/64″ 
Max Rabbeting Depth  11/32″ 
No-Load Speed  16,000 RPM 
Soft Grip Yes 
Blade Stand  Yes 
Low Battery Indicator  Yes 
Battery Type  Lithium Ion Slide-Type 
Weight (w/ BSL1830 Battery)  7.3 lbs 
Warranty Lifetime Lithium Ion Tool Body

  • Guide  (958842Z)
  • Box Guide Wrench 10mm  (940543)
  • Stopper Screw M5x14  (940650)
  • Set Gauge   (316419)

Optional (sold separately):

  • 18V Lithium Ion Slide Battery 3.0Ah BSL1830  (330067)
  • 18V Lithium Ion Slide Battery 1.5Ah BSL1815X  (330139)
  • 14.4V-18V Lithium Ion Universal Rapid Charger  (UC18YFSL)

SV12SG 1/4 Sheet Orbital Finishing Sander


  • 1.7 Amp (200W) motor provides 14,000 opm to achieve super smooth finishes 
  • 4-3/8″ x 4″ pad size, optimal for fine finish sanding applications
  • Clamp system, easy to use for quick and easy sanding sheet changes
  • Complete ball bearing construction for smooth, precise operation
  • Dust sealed switch helps protect and extend tool life
  • Dust collection system, most efficient in its class to reduce airborne particles
  • Soft Elastomer covered grip reduces vibration
  • Easy-to-palm handle provides smooth touch and comfortable grip
  • 2.4lbs, lightweight design facilitates maneuverability and ease of use

Amps 1.7
Abrasive Paper Size 4-1/2″ x 5-1/2″
Pad Size 4-3/8″ x 4″
No-Load Speed 14,000 OPM
Orbit Diameter 1/16″
Soft Grip Yes
Dust Collection Yes
Dust Sealed Switch Yes
Height 5-3/8″
Weight 2.4 lbs

  • Sanding Paper- 80 Grit (310348)
  • Dust Bag (323004)

SV13YA 5″ Variable Speed Random Orbit Finishing Sander


  • Powerful 230W 2.0 Amp motor provides an impressive 7,000-12,000 RPM to achieve super smooth finishes
  • Soft elastomer covered grip reduces vibration and provides a comfortable hold
  • Best in class sanding performance removing more stock in less time
  • Dust sealed switch helps to extend tool life
  • Complete ball bearing construction for smooth, precise operation
  • Hook and loop pad system allows you to change sanding sheets quickly and easily
  • Integrated dust collection bag ensures a cleaner environment, keeps the work surface clean and extends the life of the sanding paper
  • Weighing only 3 lbs and standing 5-11/16″ high, this compact sander is easy to use for long periods of time

Amps 2.4
Abrasive Paper Size 5″ Round
Pad Size 5″ Round
No-Load Speed 7,000 – 12,000 OPM
Orbit Diameter 1/8″
Soft Grip Yes
Dust Collection Yes
Dust Sealed Switch Yes
Height 5-11/16″
Weight 3.1 lbs

  • Sanding Paper 5″, A-P120 (5 Pieces) (308519)
  • Dust Bag (323004)

SB8V2 3″ x 21″ Variable Speed Belt Sander


  • 9.0 Amp, 1020W motor produces forcible power for the toughest sanding jobs
  • Variable speed dial adjusts speed from 820-1,475 ft/min for improved manageability during any operation
  • Soft elastomer grip surface on the main and auxiliary handles for a comfortable and secure hold
  • Wear-resistant V-belt drives the sander for double the service life
  • Flush surface design allows for quick and even sanding
  • Tracking window improves visibility of sanding surface and sanding belt during use
  • Lightweight design at only 9.5 lbs facilitates maneuverability and lessens fatigue
  • Drive belt cover is easily removed for maintenance checks
  • Left-side mounted dust collection bag improves corner sanding applications, while reducing airborne particles to keep work area clean

Amps 9.0
Sanding Belt Size 3″ x 21″
Drive Belt Type V-Belt
No-Load Speed 820-1,475 ft/min
No-Load Noise Level 87dB
Dust Collection Yes
Width 6-3/4″
Weight 9.5 lbs

  • Sanding Belt (753242)
  • Dust Bag (323011)

M12V2 3-1/4 Peak HP Variable Speed Plunge Router


  • Powerful 15 Amp motor delivers top of class cutting speed to rout through hardwoods with ease
  • Soft start motor produces 3-1/4 peak HP, while reducing torque during start up
  • Equipped with an electronic variable speed dial, the M12V2 produces 8,000- 22,000 RPMs for a wider range of cutting applications and a wider range of materials
  • Variable speed dial is conveniently located on the handle so the user can finely adjust the rotation speed without removing a hand or eyes from the work piece
  • Unique quick & fine adjustment knob combines both functionalities into the same mechanism to quickly and accurately dial plunge depths
  • Easily converts to table use
  • Bits can be easily changed from a table mounting as the collet chuck is designed to protrude 6mm from the upper side of the table
  • Equipped with an improved collet chuck that secures the bit into the armature shaft for maximum hold
  • Dust guide diverts dust and debris away from the work piece and user
  • Weighs 13.9 lbs making it safe and stable for freehand routing
  • Ergonomic design for enhanced comfort and control
  • Elastomer covers the handles to reduce transfer of vibration and prevent slippage

Full-Load Current 15 Amps
Power Input 2,000 Watts
Peak Horse Power 3-1/4
No-Load Speed 8,000-22,000
Constant Speed Control Yes
Soft Start Yes
Plunge Stroke 2-9/16″
Brake No
Switch Type Slide
Soft Grip Yes
Quick & Fine Adjustment Yes
Dust Guide Yes
Speed Control Dial Position Handle
Max. Collet Capacity 1/2″
Tool Weight 13.9 lbs

  • Straight Guide (956797)
  • Centering Gauge (325223)
  • Dust Adapter (325215)
  • Template Guide Adapter (325224)
  • Guide Bar (325216)
  • Wing Bolt (301806)
  • Wrench (323295)
  • 1/4″ Collet (323293)
  • 1/2″ Collet (301795)
  • 4mm Hex Bar Wrench (944458)

M12V2 3-1/4 Peak HP Variable Speed Plunge Router


  • Powerful 15 Amp motor delivers top of class cutting speed to rout through hardwoods with ease
  • Soft start motor produces 3-1/4 peak HP, while reducing torque during start up
  • Equipped with an electronic variable speed dial, the M12V2 produces 8,000- 22,000 RPMs for a wider range of cutting applications and a wider range of materials
  • Variable speed dial is conveniently located on the handle so the user can finely adjust the rotation speed without removing a hand or eyes from the work piece
  • Unique quick & fine adjustment knob combines both functionalities into the same mechanism to quickly and accurately dial plunge depths
  • Easily converts to table use
  • Bits can be easily changed from a table mounting as the collet chuck is designed to protrude 6mm from the upper side of the table
  • Equipped with an improved collet chuck that secures the bit into the armature shaft for maximum hold
  • Dust guide diverts dust and debris away from the work piece and user
  • Weighs 13.9 lbs making it safe and stable for freehand routing
  • Ergonomic design for enhanced comfort and control
  • Elastomer covers the handles to reduce transfer of vibration and prevent slippage

Amp  15 
Peak HP 3-1/4 
Type Plunge Base
Plunge Stroke 2-9/16″ 
No-Load Speed 8,000 – 22,000 rpm
Collet 1/4″ & 1/2″
Power Input     2,000 Watt
Variable Speed Control Yes
Soft Start Yes
Constant Speed Control Yes
Brake No
Switch Type Slide
Angle Adjustable Handle Yes
Speed Control Dial Position Top Cover
Min. Height 9-1/4″
Max Height 11-13/16″
Dust Guide No
Weight 11.7 lbs
Warranty 5-Year 

  • Straight Guide (956797)
  • Centering Gauge (325223)
  • Dust Adapter (325215)
  • Template Guide Adapter (325224)
  • Guide Bar (325216)
  • Wing Bolt (301806)
  • Wrench (323295)
  • 1/4″ Collet (323293)
  • 1/2″ Collet (301795)
  • 4mm Hex Bar Wrench (944458)

M12VE 3-1/4 Peak HP Variable Speed Plunge Router


  • Soft start with easy to operate sliding switch reduces torque and makes start up simple
  • Powerful 3-1/4 Peak HP motor produces up to 22,000 RPM
  • Lightweight and compact at just 11.7 lbs and a minimum height of 9-1/4″ for easy maneuverability
  • Ideal angle adjustable handles ensure superior control
  • Industry leading 5-year warranty

Amp  15 
Peak HP 3-1/4 
Type Plunge Base
Plunge Stroke 2-9/16″ 
No-Load Speed 8,000 – 22,000 rpm
Collet 1/4″ & 1/2″
Power Input     2,000 Watt
Variable Speed Control Yes
Soft Start Yes
Constant Speed Control Yes
Brake No
Switch Type Slide
Angle Adjustable Handle Yes
Speed Control Dial Position Top Cover
Min. Height 9-1/4″
Max Height 11-13/16″
Dust Guide No
Weight 11.7 lbs
Warranty 5-Year 

  • 1/4″ Collet Chuck (323293)
  • Template Guide Adapter  (325224)
  • Template Guide (956790)
  • 23mm Wrench (323295)
  • Straight Guide (956797)

C10FCE2 10″ Compound Miter Saw


  • 15 Amp motor, intense power for the toughest cutting jobs
  • 0-52 degree miter angle range, to the right and left for increased flexibility
  • 0-45 degree bevel range, to the left with adjustable bevel stops for precision cuts
  • Horizontal handle with soft, vibration reducing Elastomer grip adds comfort and control
  • Large extended flip fence, raises to 4″ for cutting crown molding vertically
  • Large table, provides better material support
  • Thumb actuated positive stops, easy to use for quick miter adjustments
  • Carbon brush access, allows user to replace brush as needed to greatly prolong the life of the tool
  • Dust collector attachment, to minimize airborne particles
  • Only 26.3 lbs to facilitate maneuverability and portability        

Blade Diameter 10″
Amps 15
No-Load Speed 5,000 RPM
Miter Angle Range 0-52 Degrees L & R
Bevel Angle Range 0-45 Degrees Left
Laser Marker No
Handle Horizontal
Weight 26.3 lbs

  • 10″ 24T TCT Saw Blade (311128)
  • Pivoting Flip Fence (326704)
  • Dust Bag (322955)
  • Vise Assembly (322952)
  • 10mm Box Wrench (940543)
  • Material Support Extension (321549)

C10FSHPS 10″ Sliding Dual Compound Miter Saw with Laser Marker


  • Adjustable laser marker for precise cutting lines easily adjustable to users preference
  • 12 Amp motor for the toughest cutting jobs
  • 57 Degree miter angle to the right, for ultra flexibility with 45 degree miter angle to the left
  • 0-45 Degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place
  • Positive stops on miter and bevel scale, for easy to read measurements and quick settings
  • Linear ball bearing slide system with white on black miter scale for superior accuracy and visibility 
  • Electronic speed control maintains RPM while cutting, and improves control
  • Soft start function reduced noise and recoil during start-up
  • Adjustable pivot fence broadly supports work piece for improved stability while cutting
  • Electric brake feature halts the rotation of the blade within seconds preventing unintended cuts
  • Carbon brush access allows user to replace brush as needed to greatly prolong the life of the tool
  • Highly efficient dust collector attachment collects more dust than previous models 
  • Splinter guard prevents material from splintering and increases safety

Amps 12        
Laser Marker Yes         
No-Load Speed 3,800 RPM        
Blade Diameter 10″        
Arbor Size 5/8″        
Bevel Angle Range: R & L 0-45°        
Bevel Cross Cut at 90°  (L) 2-3/16″ x 12″        
Bevel Cross Cut at 90°  (R) 1-3/16″ x 12″         
Bevel Stops: Right and Left 0° and 45°         
Miter Angle Range: Right 0-57°         
Miter Cross Cut at 57°  (R)  3-11/32″ x 6-1/2″        
Miter Angle Range: Left 0-45°         
Miter Cross Cut at 45°  (L/R)  3-11/32″ x 8-19/32″         
Miter Detent Stops: Right and Left 0°, 15°, 22.5°, 31.6° and 45°         
Miter 45°  (L/R) + Bevel 45°  (L)  2-3/16″ x 8-19/32″        
Miter 31°  (L) + Bevel 45°  (R) 1-3/16″ x 10-7/32″         
Miter 45°  (L/R) + Bevel 45°  (L)  1-3/16″ x 8-19/32″        
Weight 43 lbs

  • 10″ 40T TCT Saw Blade (310878)
  • Pivoting Flip Fence (321385)
  • 10mm Box Wrench (940543)
  • Dust Bag (998845)

C10RJ 10″ Jobsite Table Saw w Fold Roll Stand


  • Direct drive universal 15 Amp motor produces 4,500 RPM to power through the toughest ripping applications
  • Soft start function reduces noise and recoil at start-up
  • Electric brake halts the rotation of the blade within seconds for added safety
  • 10″ 40-Tooth carbide tipped blade included for high cutting capacity
  • Bevel range of 0 degree to 45 degrees for cuts ranging from 3-1/8″ (at 0 degree) to 2-1/4″ (at 45 degrees)
  • 28-3/4″ x 22″ working table top with out feed support of 28-3/4″ x 2″ for easy and stable material support
  • Telescoping table extension supports 35″ of ripping capacity to the right and 22″ to the left
  • Both the bevel scale and bevel height adjustment knobs for the blade are situation on the front of the cabinet for easy access and viewing
  • Equipped with a 3/4″ T-slot miter gauge that features a large scale with adjustable positive stops at 0, 15, 30, 45 and 60 degrees to the left and right to help guide material accurately for a truer cut
  • On-tool accessory storage allows for easy access to needed items and convenient storage while not in use
  • 8 x 13/16″ Dado capacity allows for simple dado cuts
  • Easy adjustments for blade height or angle, as well as simple fence adjustments to adhere to the cutting material
  • Stable and durable fold & roll stand for easy set up and breakdown, providing stability while in use
  • Large 8″ rubber, all-terrain treaded wheels that ensure the end user can maneuver the saw to/from and around the jobsite with ease and convenience
  • Overload protection automatically shuts off the motor in a possible current overload situation to help prevent damage to the saw
  • Riving knife ensures cutting material does not bind and/or kick-back during operation
  • Oversized power switch with emergency off safety cover is designed at knee level for immediate shut down as an added safety feature
  • Dust  port located at the rear of the base measures 2-1/2″ and can connect to a shop vac or dust collection system for a cleaner work environment    
  • Covered by Hitachi’s 2-Year Limited Warranty

Blade Size 10″
Motor 15 Amp 120V – 60Hz
No-Load Speed 4,500 RPM
Blade Type Included 40T Carbide Tipped
Table Material Aluminum
Working Table Size 28-3/4″ x 22″
Outfeed Support Size 28-3/4″ x 2″
Max Rip Capacity Right 35″
Max Rip Capacity Left 22″
Max Cut Depth @ 0 Degrees 3-1/8″
Max Cut Depth @ 45 Degrees 2-1/4″
Max Width of Dado 8 x 13/16″
Soft Start Yes
Electric Brake Yes
Dust Port Size 2-1/2″
Fold & Roll Stand Included
Tool Weight (Assembled) 96 lbs
Warranty 2-Year

  • 0″ 40-Tooth Carbide Tipped Blade  (371495)
  • Blade Guard Assembly  (371647)
  • Anti-kickback Pawl Assembly  (371648)
  • Miter Gauge Assembly  (371651)
  • Push Stick  (371532)
  • Rip Fence Assembly  (371649)
  • Outfeed Support Assembly  (371650)
  • (2) Blade Wrenches  (371633)   
  • 5mm Hex Bar Wrench  (371644)   
  • 4mm Hex Bar Wrench  (371645)
  • 2.5mm Hex Bar Wrench  (371646)

C12FDH 12″ Dual Compound Miter Saw with Laser Marker


  • Laser marker system accurately indicates where the blade will cut on the material and can be easily adjusted to the right or left of the cut mark depending upon the users preference
  • Powerful 15 Amp motor with 1,950 Watts of output power smoothly powers through hardwoods with ease
  • Tall, pivoting aluminum fence that stands at a height of 5-1/8″ allows crown molding to be cut vertically for convenience
  • Elastomer compound coats the horizontal handle, reducing vibration, while adding comfort and preventing slippage
  • Large base provides better support and balance to prevent material from warping
  • Externally accessible carbon brushes allow for quick and easy maintenance to prolong too life
  • Miter scale ranges from 0-52 degrees, both to the right and left, for a broader range of cuts
  • Miter angles can be quickly adjusted using Hitachi’s thumb actuated positive stops
  • Bevel scale ranges from 0-48 degrees to the right and left allowing the material to stay in place while the saw head flips to make opposing cuts
  • After major bevel angle is secured, micro-bevel adjustment knob can be used to dial-in to a precise angle without the weight of the saw head compromising the accuracy

Blade Size 12″
Cross Cut (90 degrees) 2-3/4″x8″ or 3-1/2″x7-1/2″
45 Degree Miter 2-3/4″ x 5-1/2″
45 Degree Bevel L 1-31/32″ x 8″
45 Bevel R 1-7/32″ x 8″
Miter R/L 45 & Bevel L 45 1-31/32″ x 8″
Miter R/L 45 & Bevel R 45 1-7/32″ x 5-1/2″
Miter Cut Range R&L 0-52 Degrees
Bevel Cut Range R&L 0-48 Degrees
Compound Cut Range Miter R&L: 0-45
Compound Cut Range Bevel R&L: 0-45
Positive Miter Stops 0, 15, 22.5, 31.6, 45
LCD Display No
Full-Load Current 15 Amps
No-Load 4,000 RPM
Laser Marker Yes
Splinter Guard Yes
Tool Dimensions (WxDxH) 24-5/8″x 30-23/32″x27″
Weight 46.3 lbs

  • 12″ 32T TCT Saw Blade (726100)
  • Dust Bag (322955)
  • Vice Assembly (323677)
  • Box Wrench (985051)
  • Hex Bar Wrench (944458)

C15FB 15″ Miter Saw


  • 15 Amp motor,  forcible power for the toughest cutting jobs
  • Electric brake feature, halts the rotation of the blade within seconds preventing unintended cuts
  • 11 positive stops on miter index, for easy to read measurements and quick setting
  • Gear case center beam support, provides longer tool life and better cutting accuracy
  • Extension guide, supports longer stock without warping
  • Depth of cut at 4-3/4″ x 7-9/32″, allows molding to be cut standing vertically
  • Dust collector attachment, to minimize airborne particles
  • Carbon brush access, allows user to replace brush as needed to greatly prolong the life of the tool
  • Debris deflection guard, safely diverts debris away from the work area

Amps 15        
No-Load Speed 3,400rpm        
Blade Diameter 15″        
Arbor Size 1″        
Miter Angle Range: Left and Right 0-57 Degrees        
Miter Detent Stops: Right and Left 0,15,22.5,30,45 and 57        
Tool Height 29-3/4″        
Weight 55lbs

  • 5″ 80T Saw Blade (974651Z)
  • 17mm Box Wrench (985051)
  • Dust Bag (976478)
  • Extension Guide Assembly (974661)
  • Vice Assembly (998897)
  • Holder Assembly (974562)
  • Stopper (974561)
  • Screw Assembly (988104)

C18DGLP4 18V Li-Ion 6-1/2″ Circular Saw (Tool Body Only)


  • Tool body compatible with Hitachi’s 18V Lithium Ion slide-type batteries for fade free power, less weight and 3x the battery life of traditional NiCd batteries (batteries and charger sold separately)
  • Soft grip handle for improved comfort and less fatigue
  • Left side blade position for easy operation
  • Electric brake for increased safety and precision  
  • 50 degree bevel angle adjusts to meet the application
  • Built-in spotlight for improved visibility of the cut line
  • Lightweight at 6.2 lbs for easy maneuverability

Volts  18 
Blade Diameter  6-1/2″ 
No-Load Speed 4,500 RPM
Electric Brake Yes 
Battery Amp Hour 1.5 – 5.0 
Battery Type Lithium Ion Slide 
Blade Position Left
Cutting Depth- 45 Degree 1-3/4″
Cutting Depth- 90 Degree 2-1/8″
Blade Edge Light Yes
Bevel Capacity 50 Degrees 
Variable Speed Trigger 
Soft Grip Yes
Weight 6.2 lbs 
Warranty Lifetime Li-Ion Tool 

  • 5″ 80T Saw Blade (974651Z)
  • 17mm Box Wrench (985051)
  • Dust Bag (976478)
  • Extension Guide Assembly (974661)
  • Vice Assembly (998897)
  • Holder Assembly (974562)
  • Stopper (974561)
  • Screw Assembly (988104)

C18DGLP4 18V Li-Ion 6-1/2″ Circular Saw (Tool Body Only)


  • 4-Mode orbital action to increase cutting efficiency through various materials
  • Tool-less blade changing system allows for quick and easy blade changes
  • Powerful dust blower keeps debris away from the cutting path
  • Soft, vibration absorbing grip provides greater comfort and a secure hold
  • Lightweight at only 4.9 lbs for easy maneuvering and less fatigue
  • Cast aluminum nickel plated base plate offers solid support and resists scratching the work surface
  • Large cut capacity (3-1/2″ in wood, 5/16″ in steel)
  • Lock-on variable speed trigger keeps the speed set during continuous operation
  • Accepts “t” shank blades only

Amps  5.5 
No-Load Speed  850-3,000 SPM
Stroke Length 3/4″ 
Orbital Action 3-Modes 
Blade Clamp Tool-less
Cut Capacity: Wood 3-1/2″
Cut Capacity: Steel 5/16″
Variable Speed Control Yes
Tool-less Blade Change Yes
Dust Blower Yes
LED Light No
Orbital Cutting Yes
Soft Grip Yes
Base Material Cast Aluminum (Nickel Plating)
Weight 4.9 lbs 

  • No. 41 Jig Saw Blade (725389)
  • Allen Wrench (944458)

CR13V2 10-Amp Reciprocating Saw


  • Powerful 10-Amp motor powers the saw to 2,800 strokes per minute
  • Tool-less blade change for faster changes and less downtime
  • Two finger variable speed trigger for ease of operation and optimal cutting power in every situation
  • Innovative molded front cover for increased safety and control
  • Reversible blade, mountable up or down, for varied cutting methods
  • Adjustable pivot foot allows blade to pivot down to access hard to reach areas
  • Triple sealed to protect the tool from dust and debris generated during use
  • Lightweight and compact for easy transport and maneuverability

Amps  10 
Stroke Length 1-1/8″ 
No-Load Speed 0-2,800 SPM
Variable Speed Trigger
Blade Change Tool-less
Orbital Action  No
Soft Grip Handle No
Length 17-1/8″
Weight 7.3 lbs 

  • All Purpose Blade (725362)
  • 4mm Hex Bar Wrench (944458)
  • Case (327054)

CR13V2 10-Amp Reciprocating Saw


  • Powerful 10-Amp motor powers the saw to 2,800 strokes per minute
  • Tool-less blade change for faster changes and less downtime
  • Two finger variable speed trigger for ease of operation and optimal cutting power in every situation
  • Innovative molded front cover for increased safety and control
  • Reversible blade, mountable up or down, for varied cutting methods
  • Adjustable pivot foot allows blade to pivot down to access hard to reach areas
  • Triple sealed to protect the tool from dust and debris generated during use
  • Lightweight and compact for easy transport and maneuverability

Amps  10 
Stroke Length 1-1/8″ 
No-Load Speed 0-2,800 SPM
Variable Speed Trigger
Blade Change Tool-less
Orbital Action  No
Soft Grip Handle No
Length 17-1/8″
Weight 7.3 lbs 

  • All Purpose Blade (725362)
  • 4mm Hex Bar Wrench (944458)
  • Case (327054)

Translate »