NIHGC LTD
NIHGC LTD

Laser Distance Meters 


Ideal kit for temperature and distance

The most rugged Fluke 62 MAX+ IR thermometer teamed with the easy to use 414D Laser Distance Meter has everything you need to configure layout and to troubleshoot electrical/HVAC problems quickly. Use the IR thermometer to test for overheating in electrical devices and HVAC components, and use the laser distance meter to determine distance, area, and volume for space configuration.

The 414D reduces errors, saves time and money.

  • The most advanced laser technology for distance measurement.
  • Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in).
  • Quick calculation of area (square feet/meters) and volume.
  • Pythagoras function indirectly measures height via two other measurements.
  • Stores up to five measurement results.
  • Battery life of 3000 measurements with automatic shut-off feature.

Fluke 62 MAX+. Small in size. Big on toughness.

  • Dust and water-resistant: IP54 rated.
  • Rugged: 3-meter (9.8-foot) drop tested.
  • Ergonomically designed: Completely redesigned for a more natural hand fit.
  • Distance to spot: 12:1.
  • Dual lasers: Identifies area to be measured.
  • Large, backlit display: Makes data easier to read, even in dark areas.

Fluke 414D Laser Distance Meter

Distance Measurement
Typical Measuring Tolerance[1] ± 2.0 mm [3]
Maximum Measuring Tolerance[2] ± 3.0 mm [3]
Range at Leica target plate GZM26 50 m / 165 ft
Typical Range[1] 40 m / 130 ft
Range at unfavorable condition[4] 35 m / 115 ft
Smallest unit displayed 1 mm / 1/16 in
∅ laser point at distances 6 /30 / 60 mm
(10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser beam[5] No
Measuring tolerance to housing[5] No
Range No
General
Laser class 2
Laser type 635 nm, <1 mW
Protection class IP40
Automatic laser off After 90 seconds
Automatic power off after 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000
measurements
Size (H X W X L) 116mm Length
53mm Width
33mm Depth
Weight (with batteries) 113 g
Temperature range: Storage Operation -25 °C to +70°C
(-13 °F to +158 °F)0 °C to +40 °C
(32 °F to +104 °F)
Calibration cycle Not applicable
Maximum altitude 3000 m
Maximum relative humidity 85% at 20 °F to 120°F
(-7 °C to 50 °C)
Safety IEC Standard No. 61010-1:2001
EN60825-1:2007 (Class II)
EMC EN 55022:2010
EN 61000-4-3:2010
EN 61000-4-8:2010
[1] Applies for 100 % target reflectivity (white painted wall), low background illumination, 25 °C.
[2] Applies for 10 to 500 % target reflectivity, high background illumination, -10 °C to +50 °C.
[3] Tolerances apply from 0.05 m to 10 m with a confidence level of 95 %. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m.
[4] Applies for 100 % target reflectivity, background illumination between 10’000 lux and 30’000 lux.
[5] After user calibration. Additional angle related deviation of ±0.01° per degree up to ±45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by ±0.1°.

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature Range -30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy ±1.0 °C or ±1.0% of reading, whichever is greater
-10 °C to 0 °C: ±2.0
-30 °C to -10 °C: ±3.0
Response Time (95%) Fluke 62 MAX+ <300 ms (95% of reading)
Spectral Response 8 to 14 microns
Emissivity 0.10 to 1.00
Optical Resolution 12:1 (calculated at 90% energy)
Display Resolution 0.1 °C (0.2 °F)
Repeatability of Readings ±0.5% of reading or <±0.5 °C (1 °F), whichever is greater
Power AA battery
Battery Life 8 hours with laser and backlight on
Physical Specifications Weight 255 g (8.99 oz)
Size (175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
Operating Temperature 0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F), (without battery)
Operating Humidity 10 % to 90 % RH non-condensing at 30 °C (86 °F)
Operating Altitude 2000 meters above mean sea level
Storage Altitude 12,000 meters above mean sea level
IP Rating IP 54 per IEC 60529
Drop Test 3 meters
Vibration and Shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
EMC EN 61326-1:2006 EN 61326-2:2006
Standards and Agency Approval Compliance  EN/IEC 61010-1: 2001
Laser Safety FDA and EN 60825-1 Class II

The Fluke 424D is our most sophisticated laser distance meter packed with versatile features to save you more time in more situations. It extends your measurement reach to 100 meters (330 feet). It offers a bigger, 4-line display, a built-in compass, and a 180º inclination sensor for leveling and height tracking.
The feature-packed 424D distance meters measures up to any situation.

  • Measures up to 100 m (330 ft)
  • Higher accuracy: +/-1 mm (0.04 in)
  • 4-line display shows you even more data at a glance
  • Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked by an obstacle
  • Corner angle feature, allows you to determine the angle of a corner
  • Compass provides a “heading” for your distance measurements
  • Stores 20 complete displays for quick recall
  • Backlight
  • Tripod mode allows you to mount the meter to a tripod when measuring long distances
  • Full Pythagoras function for height measurements
  • Audible keypad feedback
  • Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
  • Automated End-piece Correction for measuring from an edge or corner –a built-in sensor detects the position of this bracket and automatically changes the reference point
  • Minimum/Maximum function
  • Enhanced environmental protection:IP54-rated as dust and water spray resistant
  • Improved battery life of 5000 measurements with auto shut-off feature

Like all the new Fluke Laser Distance Meters, the 424D offers instant, one-button measurements of the distance between two objects with:

  • Easy targeting with bright laser
  • Quick calculations of area (square feet/meters) and volume
  • Easy-to-use addition and subtraction function

All meters offer:

  • Reduction of estimation errors, saving both time and money
  • The most advanced 2 laser technology for distance measurement
  • Instant measurement with one-button operation
  • Easy addition and subtraction function
  • Quick calculation of area (square footage) and volume
  • Easy addition and subtraction of measurements
  • Minimum/maximum function
  • Improved battery life from automatic shut-off feature
  • Pythagoras calculation for determining distance indirectly from two other measurements
  • Pouch with Fluke logo
  • Three-year warranty

The 424D and 419D additionally offers:

  • Improved visibility with backlit screen
  • Ability to measure up to 80 m (260 ft) for 419D, 100 m (330 ft) for 424D
  • Tripod mode allows you to mount to a tripod for measuring long distances
  • Stake out function
  • Enhanced Pythagoras calculation for determining distance indirectly from three other measurements
  • Audible keypad feedback
  • Storage of the last twenty measurements for quick recall of distance
  • Strong environmental protection with IP54 (water spray and dust proof) sealing

The 424D additionally offers:

  • Inclination sensor for taking measurements in hard to reach areas
  • Compass provides a “heading” for distance measurement
  • Automated end-piece correction: when measuring from an edge or corner, a built-in sensor detects the position of this bracket and automatically changes the reference point

414D 419D 424D
Distance Measurement
Typical Measuring Tolerance[1] ± 2.0 mm [3] ± 1.0 mm [3]
Maximum Measuring Tolerance[2] ± 3.0 mm [3] ± 2.0 mm [3]
Range at Leica target plate GZM26 50 m / 165 ft 80 m / 260 ft 100 m / 330 ft
Typical Range[1] 40 m / 130 ft 80 m  / 260 ft 80 m / 260 ft
Range at unfavorable condition[4] 35 m / 115 ft 60 m / 195 ft 60 m / 195 ft
Smallest unit displayed 1 mm / 1/16 in 6 /30 / 60 mm
(10 / 50 / 100 m)
∅ laser point at distances 6 /30 / 60 mm
(10 / 50 / 100 m)
6 /30 / 60 mm
(10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser beam[5] No No ± 0.2°
Measuring tolerance to housing[5] No No ± 0.2°
Range No No 360°
General
Laser class 2
Laser type 635 nm, <1 mW
Protection class IP40 IP54
Automatic laser off After 90 seconds
Automatic power off after 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000
measurements
Up to 5,000
measurements
Size (H X W X L) 116mm Length
53mm Width
33mm Depth
127mm Length
56mm Width
33mm Depth
127mm Length
56mm Width
33mm Depth
Weight (with batteries) 113 g 153 g 158 g
Temperature range: Storage Operation -25 °C to +70°C
(-13 °F to +158 °F)0 °C to +40 °C
(32 °F to +104 °F)
-25 °C to +70°C
(-13 °F to +158 °F)-10 °C to +50 °C
(14 °F to +122 °F)
Calibration cycle Not applicable Not applicable Tilt and compass
Maximum altitude 3000 m 3000 m 3000 m
Maximum relative humidity 85% at 20 °F to 120°F
(-7 °C to 50 °C)
85% at 20 °F to 120°F
(-7 °C to 50 °C)
85% at 20 °F to 120°F
(-7 °C to 50 °C)
Safety IEC Standard No. 61010-1:2001
EN60825-1:2007 (Class II)
EMC EN 55022:2010
EN 61000-4-3:2010
EN 61000-4-8:2010

The Fluke 419D professional-grade laser distance meter extends your reach to 80 meters (260 feet) with even greater accuracy. It saves you time and reduces errors with enhanced features like storage for 20 complete displays and a tripod mode for stable, long-distance measurements.

The 419D distance meters offer these enhanced features:

  • Measure up to 80 m (260 ft)
  • Higher accuracy: +/-1 mm (0.04 in)
  • View more data with backlit, three-line display
  • Full Pythagoras function for height measurements
  • Storage of 20 complete displays for quick recall
  • Audible keypad feedback
  • Minimum/Maximum function
  • Tripod mode for mounting meter on a tripod when measuring long distances
  • Stake Out feature helps you mark out defined lengths such as when constructing wooden frames
  • Automated End-piece Correction for measuring from an edge or corner –a built-in sensor detects the position of this bracket and automatically changes the reference point.
  • Enhanced environmental protection:IP54-rated as dust and water spray resistant
  • Improved battery life of 5000 measurements with auto laser off and auto power off features.

Like all new Fluke laser distance meters, the 419D offers instant, one-button measurement of the distance between two objects plus:

  • Bright laser for easy targeting
  • Quick calculations of area (square feet/meters) and volume
  • Easy-to-use addition and subtraction function
  • Carrying pouch secures to tool belt

All meters offer:

  • Reduction of estimation errors, saving both time and money
  • The most advanced 2 laser technology for distance measurement
  • Instant measurement with one-button operation
  • Easy addition and subtraction function
  • Quick calculation of area (square footage) and volume
  • Easy addition and subtraction of measurements
  • Minimum/maximum function
  • Improved battery life from automatic shut-off feature
  • Pythagoras calculation for determining distance indirectly from two other measurements
  • Pouch with Fluke logo
  • Three-year warranty

The 424D and 419D additionally offers:

  • Improved visibility with backlit screen
  • Ability to measure up to 80 m (260 ft) for 419D, 100 m (330 ft) for 424D
  • Tripod mode allows you to mount to a tripod for measuring long distances
  • Stake out function
  • Enhanced Pythagoras calculation for determining distance indirectly from three other measurements
  • Audible keypad feedback
  • Storage of the last twenty measurements for quick recall of distance
  • Strong environmental protection with IP54 (water spray and dust proof) sealing

414D 419D 424D
Distance Measurement
Typical Measuring Tolerance[1] ± 2.0 mm [3] ± 1.0 mm [3]
Maximum Measuring Tolerance[2] ± 3.0 mm [3] ± 2.0 mm [3]
Range at Leica target plate GZM26 50 m / 165 ft 80 m / 260 ft 100 m / 330 ft
Typical Range[1] 40 m / 130 ft 80 m  / 260 ft 80 m / 260 ft
Range at unfavorable condition[4] 35 m / 115 ft 60 m / 195 ft 60 m / 195 ft
Smallest unit displayed 1 mm / 1/16 in 6 /30 / 60 mm
(10 / 50 / 100 m)
∅ laser point at distances 6 /30 / 60 mm
(10 / 50 / 100 m)
6 /30 / 60 mm
(10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser beam[5] No No ± 0.2°
Measuring tolerance to housing[5] No No ± 0.2°
Range No No 360°
General
Laser class 2
Laser type 635 nm, <1 mW
Protection class IP40 IP54
Automatic laser off After 90 seconds
Automatic power off after 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000
measurements
Up to 5,000
measurements
Size (H X W X L) 116mm Length
53mm Width
33mm Depth
127mm Length
56mm Width
33mm Depth
127mm Length
56mm Width
33mm Depth
Weight (with batteries) 113 g 153 g 158 g
Temperature range: Storage Operation -25 °C to +70°C
(-13 °F to +158 °F)0 °C to +40 °C
(32 °F to +104 °F)
-25 °C to +70°C
(-13 °F to +158 °F)-10 °C to +50 °C
(14 °F to +122 °F)
Calibration cycle Not applicable Not applicable Tilt and compass
Maximum altitude 3000 m 3000 m 3000 m
Maximum relative humidity 85% at 20 °F to 120°F
(-7 °C to 50 °C)
85% at 20 °F to 120°F
(-7 °C to 50 °C)
85% at 20 °F to 120°F
(-7 °C to 50 °C)
Safety IEC Standard No. 61010-1:2001
EN60825-1:2007 (Class II)
EMC EN 55022:2010
EN 61000-4-3:2010
EN 61000-4-8:2010

Put the Fluke 414D on your tool belt and reach beyond the common tape measure – up to 50 meters (165 ft). This professional-grade laser distance meter is fast and easy to use, improving accuracy and reducing measurement errors. You’ll save time and money at every step.

The 414D reduces errors, saves time, saves money.
Features:

  • The most advanced laser technology for distance measurement
  • Simple one-button operation to instantly measure distance between two objects
  • Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in)
  • Bright laser for easy targeting even at longer distances
  • Quick calculation of area (square feet/meters) and volume
  • Easy addition and subtraction function
  • Pythagoras function indirectly measures height via two other measurements
  • Stores up to five measurement results
  • Battery life of 3000 measurements with automatic shut-off feature
  • Two-line display with display hold (until next button is pressed)
  • Carrying pouch secures to your tool belt
  • Powered by two AAA batteries

All meters offer:

  • Reduction of estimation errors, saving both time and money
  • The most advanced 2 laser technology for distance measurement
  • Instant measurement with one-button operation
  • Easy addition and subtraction function
  • Quick calculation of area (square footage) and volume
  • Easy addition and subtraction of measurements
  • Minimum/maximum function
  • Improved battery life from automatic shut-off feature
  • Pythagoras calculation for determining distance indirectly from two other measurements
  • Pouch with Fluke logo
  • Three-year warranty

414D 419D 424D
Distance Measurement
Typical Measuring Tolerance[1] ± 2.0 mm [3] ± 1.0 mm [3]
Maximum Measuring Tolerance[2] ± 3.0 mm [3] ± 2.0 mm [3]
Range at Leica target plate GZM26 50 m / 165 ft 80 m / 260 ft 100 m / 330 ft
Typical Range[1] 40 m / 130 ft 80 m  / 260 ft 80 m / 260 ft
Range at unfavorable condition[4] 35 m / 115 ft 60 m / 195 ft 60 m / 195 ft
Smallest unit displayed 1 mm / 1/16 in 6 /30 / 60 mm
(10 / 50 / 100 m)
∅ laser point at distances 6 /30 / 60 mm
(10 / 50 / 100 m)
6 /30 / 60 mm
(10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser beam[5] No No ± 0.2°
Measuring tolerance to housing[5] No No ± 0.2°
Range No No 360°
General
Laser class 2
Laser type 635 nm, <1 mW
Protection class IP40 IP54
Automatic laser off After 90 seconds
Automatic power off after 180 seconds
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000
measurements
Up to 5,000
measurements
Size (H X W X L) 116mm Length
53mm Width
33mm Depth
127mm Length
56mm Width
33mm Depth
127mm Length
56mm Width
33mm Depth
Weight (with batteries) 113 g 153 g 158 g
Temperature range: Storage Operation -25 °C to +70°C
(-13 °F to +158 °F)0 °C to +40 °C
(32 °F to +104 °F)
-25 °C to +70°C
(-13 °F to +158 °F)-10 °C to +50 °C
(14 °F to +122 °F)
Calibration cycle Not applicable Not applicable Tilt and compass
Maximum altitude 3000 m 3000 m 3000 m
Maximum relative humidity 85% at 20 °F to 120°F
(-7 °C to 50 °C)
85% at 20 °F to 120°F
(-7 °C to 50 °C)
85% at 20 °F to 120°F
(-7 °C to 50 °C)
Safety IEC Standard No. 61010-1:2001
EN60825-1:2007 (Class II)
EMC EN 55022:2010
EN 61000-4-3:2010
EN 61000-4-8:2010

Translate »