NIHGC LTD
NIHGC LTD

Electrical Testers


The pocket-sized voltage detector

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

  • Voltbeat™ technology and continuous self-test — so you always know it’s working
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
  • 20 V to 90 V AC control circuit model also available
  • Two-year warranty

Operating principle
 Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges
 Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style
 Blade or round, depending on model
Light source
 One high intensity red LED
Agency Approvals
 c CSA us, CE, C-Tick
Safety Rating
 1000 V, CAT IV
IP Rating
 IP 40
Operating Temperature
 -10 °C to 50 °C
Operating humidity ranges
0 % to 95 %  (0 °C to 30 °C)
0 % to 75 %  (30 °C to 40 °C)
0 % to 45 %  (40 °C to 55 °C)
Operating Altitude
 3000 meters
Batteries
 2 AAA alkaline batteries included

CS-350TES

Engine displacement (cm3) 35.8
Output (kW / ps) 1.46 / 1.99
Dry weight (kg) 3.5
Fuel tank capacity (L) 0.37
Fuel consumption at maximum engine power (L/h) 0.97
Chain oil tank capacity (L) 0.23
Priming pump No
Ignition system CDI
Start assist system ES-start
Chain brake Inertia
Choke w/ automatic fast idle release    Yes
Chain tensioner  Side
Saw chain pitch (inch)  3/8
Guide bar gauge (inch) 0.050
Applicable bar length (cm/inch)  30, 35, 40 / 12, 14, 16

VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red, you know there’s voltage present.

Fluke now offers three models of non-contact voltage detectors. With three uniquely designed models, Fluke is sure to have the right voltage detector for you.

Operating Principles Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.
Safety Compliance Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2
EMC Compliance Meets IEC 61326-1:2006
Operating
2AC 90 V ac to 1000 V ac, CAT IV 1000 V rated
1AC-II 90V ac to 1000 V ac, CAT IV 1000 V rated
LVD2 90 V ac to 600 V ac, CAT IV 600 V rated
Temperature
2AC -10 °C to 50 °C (-14 °F to 122 °F)
1AC-II -10 °C to 50 °C (-14 °F to 122 °F)
LVD2 0 °C to 50 °C (32 °F to 122 °F)
Humidity 0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 to 55 °C)
Altitude
2AC 2000 m (CAT IV 1000 V)
1AC-II 3000 m
LVD2 2000 m
Cleaning Clean with damp cloth
Battery Life
2AC Typical battery life of great than one year
1AC-II Typical battery life of greater than 1 year
LVD2 Dependent upon flashlight usage
Warranty Period Two years

Listening—and responding—to customers

The Fluke two-pole testers are now more rugged and easier to use than ever before.

  • Fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation.
  • Rugged, high-quality construction is built to last. This includes a heavy duty molded case, a thicker cord with wear indicator, sturdy battery case, and well-fitting and durable probe protector.
  • Enhanced ergonomic design feels good in your hand, is easy to use (even with gloves on) and quick, secure probe docking.
  • A complete family of testers with the features, functions, and price/performance to fit your applications and preferences.

Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.

  • CAT IV 600 V, Cat III 690 V safety rating Fluke’s family of Two-Pole Voltage testers comply with both regulation HSE GS 38 (tip caps) and IEC EN 61243-3: 2010.
  • 4 ways to detect ac/dc voltage A clear, instantly visible LED indicator, a bright digital display of the measurement value, an audible continuity test, and vibration to give tactile feedback (vibration indicator on T110, T130, T150).
  • Backlit graduated scale and backlit indicators
  • Vibration provides tactile feedback (T110, T130, T150).
  • Audio on/off for testing in quiet areas.
  • Low battery indicator
  • Detects voltage even with discharged batteries
  • Improved probe docking for secure storage
  • Phase rotation indicator for 3-phase systems
  • RCD functionality
    Two-button controls allow you to draw more current from the circuit under test and intentionally trip Residual-Current Devices (RCDs) remotely
  • Display Hold (T130, T150)
  • Built in electric torch (T110, T130, T150)
  • Single-phase voltage offers fast identification of live conductors
  • Push-on probe tips, probe tip protector and storage accessory
  • Probe tip protector and storage accessory
    Tip protector serves as an extra hand when opening UK electrical safety outlets.
  • Resistance testing to 1999 ohms (T150)
  • WearGuard™ insulation shows damage to test leads

Voltage AC/DC 12V – 690V 12V – 690V 6V – 690V 6V – 690V
Continuity 0 – 400 kΩ
Frequency 0 / 40 – 400 Hz
Phase rotation 100 V – 690 V
Resistance measurement Up to 1999 Ω
Response Time (LED indicator) < 0.5 s
200 kΩ input impedance Current draw 3,5 mA @ 690 V
Current draw 1,15 mA @ 230 V
7k Ω input impedance (with load buttons pressed) Current draw 30 mA @ 230 V
Safety rating CAT II 690V
CAT III 600V
CAT III 690V
CAT IV 600V
IP rating IP54 IP64 IP64 IP64

 

Specifications
Power requirement 2-AA batteries
Net weight 180 g (T90)
280 g (T110. T130, T150)
Size (length, width, height) 23 x 6.5 x 3.8 cm (T90)
26 x 7 x 3.8 cm (T110, T130, T150)
Warranty 2 years
Country of origin Romania

Electrical tester with OpenJaw™ Current

The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Available in 600V and 1000V models.

  • Automatically measures volts ac and volts dc with precise digital resolution
  • Displays resistance to 1000Ω
  • Easy and accurate OpenJaw™ current measurement
  • Continuity beeper
  • Compact design with neat probe storage
  • Rugged enough to withstand a 10-foot (3m) drop
  • Detachable SlimReach™ probe tips are customized for national electrical standards
  • Test leads accept Fluke accessory test clips
  • Available in 600V and 1000V models
  • Can stay connected much longer than solenoid type tester
  • Auto off mode to conserve battery life
  • Optional holster attaches to a belt and neatly stows test leads

Continuity beeper
Threshold:   On at <25 Ω, off at >400 Ω
Volts indicator LED
Threshold:  Guaranteed on by 30V ac
Environmental Specifications
Operating Temperature
 -10 °C to 50 °C
Storage Temperature
 -30 °C to 60 °C
Humidity (Without Condensation)
 0% to 95% (5 °C to 30 °C)
 0% to 75% (30 °C to 40 °C)
 0% to 45% (40 °C to 50 °C)
Dust/water resistance
 Yes
Operating Altitude
 2000 meters max
Temperature Coefficient
 0.1 x (specified accuracy)/degree C (<18 °C or >28 °C)
Safety Specifications
Overvoltage category
T5-600:   600V ac/dc, CAT III
T5-1000:  1000V ac/dc, CAT III
600V ac/dc, CAT IV
Agency Approvals
 UL, CSA, and VDE
Maximum voltage
 between any terminal and earth ground
Mechanical & General Specifications
Size
 30.5 x 51 x 203 mm
Weight
 300g
Warranty
 2 years
Battery Life
 200 hour zinc chloride, 400 hour alkaline
Battery type
 Two AA zinc chloride
Low battery indicator
 Yes
Current sensor opening
 12.9 mm
Calibration cycle
 1 year
Test leads
Type:  Heavy duty, flexible leads rated for 1000V use.
 Field replaceable leads terminate in male shrouded banana plugs
Probes:  One red, one black. of two tip
 Detachable Slim-ReachT probe tips in one
Styles:  TP1 Slim Reach Test Probes

Electrical tester with OpenJaw™ Current

The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. 

  • Automatically measures volts ac and volts dc with precise digital resolution
  • Displays resistance to 1000Ω
  • Easy and accurate OpenJaw™ current measurement
  • Continuity beeper
  • Compact design with neat probe storage
  • Rugged enough to withstand a 10-foot (3m) drop
  • Detachable SlimReach™ probe tips are customized for national electrical standards
  • Test leads accept Fluke accessory test clips
  • 600V model
  • Can stay connected much longer than solenoid type tester
  • Auto off mode to conserve battery life
  • Optional holster attaches to a belt and neatly stows test leads
  • AC current
  • Display hold

Jaw opening 12.9 mm (0.5 in)
Max wire size 1/0 THHN Cable
Current range ac rms 0 to 100.0 A
Accuracy ac current (50/60 Hz) 3 % ± 3 counts
AC Response Averaging
Voltage range ac 0 to 600 V
Accuracy ac voltage 1.5 % ± 2 counts
Voltage range dc 0 to 600 V
Accuracy dc voltage 1 % ± 1 count
Resistance range 0 to 1000 Ω
Continuity beeper threshold On at <25 Ω, off at >400 Ω
Volts indicator LED threshold Guaranteed on by 30 V ac

 

Environmental Specifications
Operating Temperature -10 °C to 50 °C
Storage Temperature -30 °C to 60 °C
Humidity (Without Condensation) 0 % to 95 % (5 °C to 30 °C); 0 % to 75 % (30 °C to 40 °C);
0 % to 45 % (40 °C to 50 °C)
Dust/water resistance Yes
Operating Altitude 2000 meters max
Temperature Coefficient 0.1 x (specified accuracy)/°C (<18 °C or >28 °C)

 

Safety Specifications
Overvoltage category CAT III 600 V ac/dc (EN61010-1)
Agency Approvals UL, CSA, and VDE
Maximum voltage Between any terminal and earth ground

 

Mechanical and General Specifications
Size 30.5 mm x 51 mm x 203 mm
Weight 300g
Warranty Two-years
Battery Life 200 hour zinc chloride, 400 hour alkaline
Battery type 2 x AA
Low battery indicator Yes
Current sensor opening 12.9 mm
Calibration cycle 1 year
Test leads
Type: Heavy duty, flexible leads rated for 1000V use.
Field replaceable leads terminate in male shrouded banana plugs
Probes: One red, one black.
Detachable Slim-Reach™ probe tips
Styles: TP1 Slim Reach™ Test Probes

Translate »